Photo gallery
Structural tile shaped insulated panel
Presentation
IsoCoppo Flat - structural tile shaped insulated panel:
IsoCoppo flat is Alubel Spa’s structural metal panel that recalls traditional tile aspect. IsoCoppo flat is equipped with a complete system of accessories that enables to solve any problem of roofings; its polyurethane core combined with its aesthetic make it the perfect insulated panel for buildings energy saving.
Available thicknesses:
- 30 mm
- 40 mm
- 50 mm
- 60 mm
- 80 mm
- 100 mm
Suitable for:
civil roofing and for the rehabilitation of old roofs with landscape constraints.
Minimum slope:
15%
Technical features:
- high load bearing
- structural
- insulated
- length on demand (350 mm multiples)
Structural tile shaped insulated panel
Lateral overlapping of half a corrugation
Detail of drainage canne
Fixing on wood
Fixing on metal
External sheet:
Standard colours
Internal sheet:
Standard colours
External sheet:
Extra standard colours
Internal sheet: timber effect laminated
Extra standard colours
Accessories
To be used for connecting pitches, both on top and on diagonal. It is applied in sheets overlapping, both on two and non multi-pitches roofing .
Coppo waves remain open.
Development 406 mm, standard length 3150 mm
It can be used on top of two pitches, it has serrated profile for closing waves but, as it is composed of 2 pieces, it allows a more regular assembly, as it is not necessary that two opposite pitches are perfectly symmetric.
Partial development 406 mm; Total development 812 mm; standard length 3150mm
To be used for connecting pitches, both on top and on diagonal.· It is composed by a central part and two micro corrugated bendings of special material., which allows a manual arrangement to every corrugation shape, with every pitches or angulations.
Serration allows waves corrugation closure; it can be used only on two symmetric pitches.
With micro drilling for a correct ventilation.
Connection element between vertical wall and roofing pitch. Ridge capping has available ventilation exit mouths and connection bending with sheet Coppo profiled.
Thermo-drilling element in transparent compact polycarbonate.
Maximum dimensions 1340x 1050
Crossing element for roofing inspection or as lighting of an underneath space.
One-piece with manual or electric opening.
On request it is available with double frame as smokes evacuator.
Element in stainless steel prepainted Coppo Red, thickness 1.0 mm.
Flat part dimensions 420 mm x 380 mm
Element molded in prepainted aluminium Coppo Red, thickness 1.2 mm.
Application under the sheet
Element in polyethylene with transverse section like the sheet profile
PVC-comb like
Available in:aluminium, copper, specific for ventilated roof
It is a particular breather, synthetic and watwerproof membrane. The inner vapour pass through while other agents (as rain, damp etc.) stop out. It is particularly suitable for ventilated roof, as protection of isolated layer. Coil highness cm 150 (coil m 70).
Copper
Aluminium
Prepainted steel
With Alubel washer diam. 19 mm
In stainless steel 6,5 x 80 mm
Aluminium 3,4 x 9 mm
Copper 3,4 x 9 mm
Stainless steel 3,4 x 7 mm
Sealent tape.
Available in 3 width: 50, 75 and 100 mm
For restoration and touch up.
